FAQ Contact Us:EMail Call Us:(302) 629-8508
Mounting Hardware And Kits Components And Related Return To Main Index Page




Push button non retractable lap seat belts,non retractable retrofit lap seat belt sets, retractable lap seat belts and retractable lap seat belts with shoulder harness available for bench and bucket seats for installation in most makes and models of cars and trucks. The seat belts are universal fit and are not implied to be vehicle or application specific. All of the seat belts and related hardware are new and manufactured to meet or exceed current FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302.

Additional Buckle Choices.











Non Retractable Lap Seat Belt

Quantity:
Quantity:

Quantity:
Quantity:

Product Notes: Click On Picture To Enlarge.
  • Buckle: Push button with globe design framed in black on silver background.
  • All measurements/lengths are approximate.
  • Length 60": Adjustable latch side 35". Fixed buckle side 25".
  • Length 74": Adjustable latch side 42". Fixed buckle side 32".
  • Length 90": Adjustable latch side 50". Fixed buckle side 40".
  • Length 100": Adjustable latch side 59". Fixed buckle side 40".
  • Length 110": Adjustable latch side 65". Fixed buckle side 44".
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • CVR-BH Cover: Snaps on to bolt head. Sold each.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates plates to add support to the mounting points which should be used when seat belts are being installed in a location were not previously dealer or factory installed. MH2 standard mounting kit is not required when ordering.













  • Non Retractable Retrofit Lap Belt Sets

    Set includes seat belts and retrofit mounting kits for 2 persons/positions. A retrofit mounting kit includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not dealer or factory installed. When adding an additional seat belt for a center/middle sitting position additional mounting hardware is not required.

    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge.
  • Buckle: Push button with globe design framed in black on silver background.
  • All measurements/lengths are approximate.
  • Lap Belt Length 60": Adjustable latch side 35". Fixed buckle side 25".
  • Lap Belt Length 74": Adjustable latch side 42". Fixed buckle side 32".
  • Lap Belt Length 90": Adjustable latch side 50". Fixed buckle side 40".
  • Length 100": Adjustable latch side 59". Fixed buckle side 40".
  • Length 110": Adjustable latch side 65". Fixed buckle side 44".
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • CVR-BH Cover: Snaps on to bolt head. Sold each.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    .


  • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Mounting Hardware And Kits Components And Related Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW8 2-14-2024)