FAQ Contact Us:EMail Call Us:(302) 629-8508
Components And Related Mounting Hardware And Kits Return To Main Index Page


Push button non retractable lap seat belts and non retractable lap seat belt sets that include underbody reinforcing plates for sofa or dinete area installation, retractable lap seat belts for attachment to drivers or passenger seat frame or floor plus combination retractable lap seat belt with shoulder harness for driver or passenger with shoulder harness bracket extension.

These seat belts are a universal fit and not implied to be vehicle or application specific. All of the seat belts and related hardware are new and manufactured to exceed all current FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302.



Non Retractable Lap Seat Belt

Suggested Use: To replace a damaged non retractable factory installed sofa or dinette seat belt or to add a new non retractable lap seat belt in a location not previously installed. Available in connected lengths of 74" and 90". Some installations will require the use of L-brackets to mount the seat belt upright making it easier to access. When a seat belt is being installed in a location not previously installed it is suggested that underbody reinforcing plates be used to add support to the mounting points. See the end of the page for mounting hardware.

Quantity:

Quantity:

Product Notes: Click On Picture To Enlarge.
  • Buckle: Push button with globe design framed in black on silver background.
  • Anchor End Fitting:
  • Length 74": Adjustable latch side 42". Fixed buckle side 32".
  • Length 90": Adjustable latch side 50". Fixed buckle side 40".
  • Length 100": Adjustable latch side 59". Fixed buckle side 40".
  • Length 110": Adjustable latch side 65". Fixed buckle side 44".

    Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
  • For product questions or ordering assistance call (302)629-8508.



    • Retractable Lap Seat Belt

    Suggested Use: To mount a retractable lap seat belt directly to the driver or passengers seat frame, to replace a damaged factory installed seat belt, to upgrade the driver or passengers seat belt from a non retractable lap seat belt to a retractable lap seat belt or to install a retractable lap seat belt in a location not previously installed. Some installations will require the use of L-brackets when being mounted on the floor so seat belt or buckle side will be upright. When a seat belt is being installed in a location not previously installed it is suggested that underbody reinforcing plates be used to add support to the mounting points.

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge.
  • For driver or passenger side installation.
  • Buckle: Push button with globe design framed in black on silver background.
  • Buckle Side: 12" long in molded plastic sleeve.
  • Retractor Type: Automatic locking. Locks once pulled and released.
  • Retractor Webbing Length: 52" when fully extended.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit includes threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
  • 200K Standard Mounting Kit includes bolts, washers, nuts, oversize underbody reinforcing washers plus L-bracket to mount retractor upright.
  • 202K Retrofit Bucket Seat Mounting Kit includes L-bracket for retractor and buckle side, mounting hardware plus threaded underbody reinforcing plates.
  • 204K Retrofit Bench Seat Mounting Kit includes L-bracket for retractor, mounting hardware plus underbody reinforcing plates.





    • Retractable Lap Belt With Shoulder Harness

    Note:Includes 8" upper shoulder harness strap mounting bracket which lowers the webbing approximately 7 1/2" from the mounting point for the a motorhome or rv installation where the shoulder harness strap mounting point is higher than in a passenger car.

    Suggested Use: To mount directly to the driver or passengers side wall to replace a damaged factory installed combination retractable lap seat belt, to upgrade from a non retractable or retracttable lap seat belt only to a combination lap seat belt with shoulder harness or to install a combination retractable lap seat belt with shoulder harness in a location not previously installed. When the installation requires the retractor or buckle side be mounted upright to the floor by the side of seat L-brackets will be required. When seat belts are being installed in a location not previusly installed underbody reinforcing plates should be used to add support to the mounting points.

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge.
  • For driver or passenger side installation.
  • Buckle: Push button with globe design framed in black on silver background.
  • Buckle Side: 12" long in molded plastic sleeve.
  • Retractor Type: Web sensitive emergency locking(ELR). Locks on sudden webbing movement.
  • Retractor Webbing Length: 140" when fully extended.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit includes reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
  • 300K Standard Mounting Kit includes bolts, washers, nuts, oversize reinforcing washers plus L-bracket to mount the retractor upright.
  • 302K Retrofit Bucket Seat Mounting Kit includes bolts, washers, nuts, underbody and shoulder harness mounting reinforcing plates plus L-brackets to mount retractor and buckle side upright.
  • 303K Retrofit Bench Seat Mounting Kit includes bolts, washers, nuts, underbody and shoulder harness mounting reinforcing plates plus L-bracket to mount retractor upright.



    • Mounting Hardware And Related

    Bolt And End Fitting Cover

    Quantity


    Product Notes: Click On Picture To Enlarge
  • CVR-BH: Snap on to the any bolt head included in listed mounting kits. Sold each. Black.
  • CVR100B: Snaps on to the bolt head covering bolt head and anchor end fitting. Sold each. Black.
  • For product questions or ordering assistance call (302)629-8508.



    • L-Brackets And Bracket Kits

    Suggested Use: To mount a non retractable lap seat belt or a seat belt retractor or buckle side upright on to the floor.

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • RB6: L-Bracket. Yellow zinc. 1 1/2" x 1 7/8. 90 degree bend.
  • MH15: Includes 2 RB6 L-brackets plus mounting hardware to attach ends fitting, retractor or buckle side to L-bracket and L-bracket to existing 7/16-20 floor underbody reinforcing plate.
  • For product questions or ordering assistance call (302)629-8508.







    • Extension

    Suggested Use: To raise the height of a non retractable lap seat belt, seat belt retractor or buckle side. If mounting upright L-brackets will be required.

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • RB7: 4" Flat extension. 4"L x 1 1/2W x 1/8" thick. 2 3/4" center hole to center hole.
  • MH22: Includes RB7 plus 4 zinc chromate bolts, lock washers and nuts.
  • RB11: 7" Flat extension. 7 1/2"L x 1 1/2W x 1/8 thick. 6" center hole to center hole.
  • MH21: Includes RB11 plus 4 zinc chromate bolts, lock washers and nuts.
  • MH18: Includes: (2)L-brackets, (2)4" extensions plus mounting hardware to attach extensions to anchor end fitting,retractor or buckle side plus hardware to attach extension to L-brackets and L-brackets to existing 7-16-20 underbody reinforcing plates.
  • For product questions or ordering assistance call (302)629-8508.



    • Reinforcement Plates, Underbody

    Quantity

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached 7/16-20 weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB4: Measures 3" x 1 1/2" with 7/16-20 threaded bolt hole.
  • RB4-2: Same as RB4 except pair.
  • For product questions or ordering assistance call (302)629-8508.


    • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Components And Related Mounting Hardeware And Kits Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW44 6-21-22)