FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
Related Items On Sale Hardware And Mounting Kits

Seat belts for 1967, 1968 and 1969 Chevrolet Camaro RS, SS and Z28 and 1967, 1968 and 1969 Pontiac Firebird and Pontiac TransAm. Seat belt configurations manufactured under a GM reproduction license include non retractable lap seat belts and original factory type retractable lap seat belt sets that are available with or without original style independant shoulder harness in colors to match most original interiors. All seat belts are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

(Click On Picture) 1967-69 Camaro retrofit retractable lap and shoulder harness conversion kit that can be installed when the original configuration is not required.

(Click On Picture) 1967-69 Firebird retrofit retractable lap and shoulder harness conversion kit that can be installed when the original configuration is not required.

(Click On To Enlarge) 7 Panel Seat Belt Webbing is a polypropylene blend and the most common used seat belt webbing since it offers the largest selection of webbing colors and has the lowest per yard cost becasue of the large quantity manufactured. All of the seat belt webbing utilized during the production process is 2"(1 15/16th) wide and manufacture certified to meet or to exceed all federal testing requirements. Webbing color, thickness or feel is not guaranteed to match existing seat belt or interior color.

(Click On To Enlarge) 3 Panel Seat Belt Webbing: is manufactured to feel and look like early production seat belt webbing used in most 1963-75 makes and models and is softer and more flexible than 7 panel webbing. It is produced in a limited number of colors and quantities making it more expensive than 7 panel seat belt webbing. All of the seat belt webbing utilized during the production process is 2"(1 15/16th) wide and manufacture certified to meet or to exceed all federal testing requirements. Webbing color, thickness or feel is not guaranteed to match an existing seat belt or interior color.





Non Retractable Lap Belt: 7 Panel Webbing

Quantity:
Quantity:

Quantity:
Quantity:

Product Notes: Click On Picture To Enlarge
  • Except black all special order. Not Returnable. Allow additional 5-7 business days for production.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckle color matched to webbing. Black buckle is included with all other colors.
  • Buckle: Metal. Measures 2 1/4"W X 2 5/8" L.
  • Buckle Press: 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • End Fittings: Chrome flat with a 1/2" mounting bolt holes.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor: Clip-on. Chrome "Roll-A-Belt" style. Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting kit: Includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.





  • Non Retractable Lap Belt: 7 Panel Webbing

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Except black all special order. Not Returnable. Allow additional 5-7 business days for production.
  • See Webbing Sample Page to view all available colors or to order samples.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8".
  • Buckle Press: 7/8" x 1" with 9/16" x 5/8" GM Mark Of Excellence framed in silver on black background.
  • End Fittings: Chrome flat with a 1/2" mounting bolt holes.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • 80296 Retractor: Clip-on. Chrome "Roll-A-Belt" style. Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting kit: Includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.





  • Non Retractable Lap Seat Belt: 3 Panel Webbing

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Except black all special order. Not Returnable. Allow additional 5-7 business days for production.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckle color matched to webbing. Black buckle is included with all other colors.
  • Buckle: Measures 2 1/4" X 2 5/8".
  • Buckle Press: 1 1/8" x 1 1/8" with 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • End Fittings: Flat. Zinc chromate with 9/16th mounting bolt holes.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor: Clip-on. Chrome "Roll-A-Belt" style. Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit which includes threaded underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting kit: Includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.



  • Non Retractable Shoulder Harness Set: 3 Panel Webbing

    Quantity

    Product Notes: Click On Picture To Enlarge
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
  • Includes: Non retractable independent shoulder harness for driver and passenger.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckles and all plastic pieces color matched to the webbing color.
  • Buckle: Measures 2 1/4" X 2 5/8".
  • Buckle Press: 1 1/8" x 1 1/8" with 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • For product questions or ordering assistance call (302)629-8508.
  • Car Sets: With 3 Panel Webbing




    Retractable Lap Seat Belt Set

    Quantity

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Except black all special order. Not Returnable. Allow additional 5-7 business days for production.
  • Set Includes: Retractable lap seat belts for driver and passenger.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckle, boots and plastic pieces color matched to the webbing.
  • Buckle: Measures 2 1/4" X 2 5/8".
  • Buckle Press: 1 1/8" x 1 1/8" with 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kits
    A retrofit mounting kit which includes threaded underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting kit: Includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.



  • Car Set: Retractable Front And Non Retractable Rears

    Quantity

    Product Notes: Click On Picture To Enlarge
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
  • Includes: Retractable lap seat belt set for driver and passenger plus 3 non retractable lap seat belts.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckle, boots and plastic pieces color matched to webbing color.
  • Buckle: Measures 2 1/4" X 2 5/8" with 1 1/8" x 1 1/8" press area with 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • For product questions or ordering assistance call (302)629-8508.




  • Car Set Complete: Retractable Front, Harness And Rears

    Quantity

    Product Notes: Click On Picture To Enlarge
  • Special order. Not returnable. Allow additional 3-5 business days for production.
  • Includes: Front retractable lap seat belt set and non retractable shoulder harness set for driver and passenger plus 3 non retractable lap seat belts.
  • See Webbing Sample Page to view all available colors or to order samples.
  • All colors listed include buckles, boots and plastic pieces color matched to webbing color.
  • Buckle: Measures 2 1/4" X 2 5/8".
  • Buckle Press: 1 1/8" x 1 1/8" with 3/4 x 3/4 GM Mark Of Excellence framed in silver on blue background.
  • For product questions or ordering assistance call (302)629-8508.


  • Body Reinforcement Plates

    Quantity

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16-20 fine thread bolt.
  • RB4-2: Same as RB4 except pair.
  • For product questions or ordering assistance call (302)629-8508.


  • FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
    Related Items On Sale Hardware And Mounting Kits


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW-VS1 11-7-2019)