FAQ Contact Us:EMail Call Us:(302) 629-8508
Components And Related On Sale Return To Main Index Page


Important Installation Information

  • For installation in a coupe or hardtop only.
  • The installation requires the use of an existing threaded reinforced two bolt hole, single bolt hole or a factory reinforced threaded weldnut between the inner and outer steel panel located on the lower roof panel or pillar post behind the interior trim to be able to attach the shoulder harness strap upper bracket mounting point.
  • To create the shoulder harness upper bracket mounting point when one of the required factory existing mounting points do not exist access to an area between the inner and outer steel body panel on the lower roof panel or pillar post will be required to install a supplied threaded reinforcing plate between the inner and outer steel panel attaching it by welding or using the supplied rivets to create the shoulder harness strap upper mounting bracket point.
  • Stud plates and mounting bolts used to convert an existing factory two bolt mounting point to a single stud mounting point required to attach the shoulder harness strap upper bracket are included.
  • Kits include required mounting hardware with detailed installation instructions based on the requirements detailed above.
  • All seat belts and hardware are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.
  • Click on pictures below to enlarge.











    With Starburst/Sunburst Buckle

    Quantity:

    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Includes: Seat belts for driver and passenger and installation hardware and instructions.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8".
  • Bucket seat kits include 12" contoured molded plastic buckle side sleeve.
  • Front Center/Rear Seat Belt Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Front Center/Rear Seat Belt Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.








  • With White Press Buckle

    Quantity:

    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Includes: Seat belts for driver and passenger and installation hardware and instructions.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8".
  • Bucket seat kits include 12" contoured molded plastic buckle side sleeve.
  • Front Center/Rear Seat Belt Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Front Center/Rear Seat Belt Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.








  • With Mark Of Excellence Logo Buckle

    Quantity:

    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Includes: Seat belts for driver and passenger and installation hardware and instructions.
  • Bucket seat kits include 12" contoured molded plastic buckle side sleeve.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8".
  • Front Center/Rear Seat Belt Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Front Center/Rear Seat Belt Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.


  • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Components And Related On Sale Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW33 10-12-21)