FAQ Contact Us:EMail Call Us:(302) 629-8508
Mounting Hardware And Kits Components And Related Return To Main Index Page





Vintage lift lid release buckle with black lid with recessed bowtie non retractable lap seat belts plus retrofit lap seat belt sets which include underbody reinforcing plates manufactured or assembled in the USA with USA certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302. All seat belts are new universal fit and not implied to be vehicle or application specific.

Additional Buckle Choices.









Non Retractable Lap Seat Belt

Quantity:
Quantity:

Quantity:
Quantity:


Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings:
  • Buckle(Rmfg): Black powder coated lid with 13/16th recessed Bowtie. Chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering..




    • Retrofit Lap Seat Belt Set

    Set includes seat belts and retrofit mounting kit for 2 persons/positions. A standard retrofit mounting kit includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously installed. See non retractable lap seat belt above to add a matching front center or rear seat belts.

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fittings:
  • Buckle(Rmfg): Black powder coated lid with 13/16th recessed Bowtie. Chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.





    		•

    Deluxe Retrofit Lap Seat Belt Set

    Set includes seat belts and deluxe retrofit mounting kit for 2 persons/positions. A deluxe retrofit mounting kit includes hex head zinc chromate mounting bolts, factory style curved steel underbody reinforcing plates with weldnut to add support to the mounting points which should be used when installing seat belts in a location they were not previously installed plus bolt head and end fitting covers. See non retractable lap seat belt above to add a matching front center or rear seat belts.

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fittings:
  • Buckle(Rmfg): Black powder coated lid with 13/16th recessed Bowtie. Chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.


    • Related Items

    Cover, Bolt Head

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Snaps on to bolt head of any bolt used in the retrofit or mounting kits listed.
  • For product questions or ordering assistance call (302)629-8508.

    • Cover, End Fitting

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Fits any end fitting used on the seat belts listed.
  • Snaps on to bolt head covering the bolt head and the anchor end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.




    • Mounting Kits

    Quantity:

    Product Notes: Click On Picture To Enlarge

  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201 Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
  • For product questions or ordering assistance call (302)629-8508.





    • Reinforcement Plates, Underbody

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached 7/16-20 weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB4: Measures 3" x 1 1/2" with 7/16-20 threaded bolt hole.
  • RB4-2: Same as RB4 except pair.

  • MH7: Hex head 7/16th-20 x 1 1/2". 1 1/4" threaded area. Zinc chromate.
  • MH11: Hex head 7/16th-20 x 1 3/4". 1 1/2" threaded area. Zinc chromate.
  • MH12: 7/16th Lock washer. Zinc chromate.
  • MH13: 7/16th-20 Hex nut. Zinc chromate.
  • All measurements are approximate.
  • For product questions or ordering assistance call (302)629-8508.



    • Retractors, Clip On

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Mounting Hardware And Kits Components And Related Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.



    (ARW15 6-17-24)