FAQ Contact Us:EMail Call Us:(302) 629-8508
Components And Related Mounting Hardware Return To Main Index Page




Vintage chrome lift lid buckle seat belts for 1953 to 1973 Porsche 911, Porsche 912, Porsche 914, Porsche Coupe, Porsche Targa and Porsche 356 available as a non retractable lap seat belt with fixed or snap hook anchor end fittings plus retrofit retractable lap seat belts with rear interior quarter panel mounted shoulder harness retractors. The seat belts listed are not implied to be originals or a direct replacement reproduction. All seat belts are new and manufactured or assembled in the USA with USA certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302













Non Retractable Lap Belt With Fixed Ends

Quantity:
Quantity:

Quantity:
Quantity:


Product Notes: Click On Picture To Enlarge.
See Webbing Page to view available colors.
  • Anchor End Fittings: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • CVR100 Cover: Snaps on to bolt head covering anchor end fitting and bolt head. Sold each.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.








    • Non Retractable Lap Belt With Snap Hook Ends

    Quantity:
    Quantity:

    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: Chrome snap hooks that attach to floor mounted to eyebolts. 1 1/2" Wide. 2 5/8" Long. Opens 3/8".
  • Buckle: Lift lid release with chrome lid and chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
  • MH3 Standard Mounting Kit includes yellow zinc eyebolts, washers, nuts and oversize underbody reinforcing washers.
  • 205K Retrofit Mounting Kit includes yellow zinc eyebolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    .










    • Front Retractable Lap And Shoulder Harness Set

    Quantity:
    Quantity:

    Quantity:
    Quantity:



    Product Notes: Click On Picture To Enlarge
    Front Seat Belt Set Specifications.
  • : Special Order. All except black are sold not returnable.
  • Set includes combination lap belts and shoulder harness for driver and passenger.
  • Floor Anchor End Fittings: Snap hooks(2 7/8" Wide. 2 3/4" Long. Opens 1/2") that attaches to floor mounting eyebolts.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Buckle Side Length: 30" Adjustable.
  • Retractors: Web sensitive emergency locking with full cover.
  • Retractor Cover Measures:3 3/4W x 3 1/2L(4 3/4 to end of bolt plate extension) x 3H
  • Retractor Webbing Length: 110" fully extended.

    Rear Seat Belt Specifications:
  • Anchor End Fittings: Chrome fixed with 1/2" bolt holes.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Length 35": Adjustable buckle side 25". Fixed latch side 10".
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    Front Retractable Seat Belts:
  • MH14-2 Standard Mounting Kit includes harness retractor mounting bolts, lock washers, lap belt portion eyebolts, nuts and oversize underbody washers for driver and passenger.
  • 306K-2 Retrofit Mounting Kit includes harness retractor mounting bolts,lap belt portion eyebolts,lock washers plus threaded underbody reinfocing plates for driver and passenger to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.

    Rear Seat:
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.



    • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Components And Related Mounting Hardware Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.



    (ARW-VS6 7-27-24)