FAQ Contact Us:EMail Call Us:(302) 629-8508
Components And Related Mounting Hardware And Kits Return To Main Index Page



Seat belts for 1965-73 Ford Mustang coupe, convertible and hatchback models to include non retractable lap seat belts, retrofit non retractable lap seat belt sets and retractable lap seat belts with vintage lift lid buckles, standard and deluxe with starburst design on the press are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

Retractable Lap Belt With Shoulder Harness Kits.
Shelby Mustang Seat Belts.

With Vintage Chrome Lift Lid Buckle

Non Retractable Lap Seat Belt

Quantity:
Quantity:

Quantity:
Quantity:


Product Notes: Click On Picture To Enlarge.
See Webbing Page to view available colors or to order samples.
  • Anchor End Fittings: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kit Information
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.





    		•

    Retrofit Non Retractable Lap Belt Set

    Set includes seat belts and retrofit mounting kit for 2 persons/positions. A retrofit mounting kit includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously dealer or factory installed.
    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
    See Webbing Page to view available colors or to order samples.
  • Anchor End Fittings: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kit Information
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.









    		•

    Deluxe Retrofit Non Retractable Lap Seat Belt Set

    Set includes seat belts and deluxe retrofit mounting kit for 2 persons/positions. A deluxe retrofit mounting kit includes sleeved mounting bolts, bolt head and end fitting covers matched to the webbing color, factory style curved steel underbody reinforcing plates with weldnut to add support to the mounting points which should be used when installing seat belts in a location they were not dealer or factory installed.

    Quantity:

    Quantity:
    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
    See Webbing Page to view all available colors or to order samples.
  • Anchor End Fittings: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Belt Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.

    • With Standard Starburst Push Button Buckle

    Non Retractable Lap Seat Belt

    Quantity:
    Quantity:

    Quantity:
    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Metal pushbutton with framed in silver starburst on black background. Measures 2"L(not including webbing slot)x 1 7/8"W.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kit Information
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.





    		•

    Retrofit Non Retractable Lap Belt Set

    Set includes seat belts and standard retrofit mounting kit for 2 persons/positions. A standard retrofit mounting kit includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously dealer or factory installed.

    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fitting: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Metal.Measures 1 7/8"W x 2"L not including webbing slot.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Belt Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.




    		•

    Deluxe Retrofit Non Retractable Lap Belt Set

    Set includes seat belts and deluxe retrofit mounting kit for 2 persons/positions. A deluxe retrofit mounting kit includes sleeved mounting mounting bolts, bolt head and end fitting covers and factory style curved steel underbody reinforcing plates with weldnut which should be used to add support to the mounting points when installing seat belts in a location they were not previously dealer or factory installed.
    Quantity:

    Quantity:
    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fitting: Yellow zinc with 35 degree bend and 1/2" bolt hole.
  • Buckle: Metal.Measures 1 7/8"W x 2"L not including webbing slot.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Belt Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.


    • With Deluxe Starburst Push Button Buckle

    Non Retractable Lap Belt

    Quantity:
    Quantity:

    Quantity:
    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: with 1/2" bolt hole.
  • Buckle: Plastic push button measures 2 1/2" L x 2 3/8" W. Textured black top with chrome base.
  • Buckle Press Area: Recessed with 1 1/16" OD.
  • Buckle Press: Recessed 7/8" starburst framed in silver on black background.
  • Length 55": Adjustable buckle side 35". Fixed latch side 20".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kit Information
    The mounting bolts supplied will not fit original factory underbody reinforcing plates.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a location they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.







    		•

    Retrofit Non Retractable Lap Belt Set

    Set includes seat belts and standard retrofit mounting kit for 2 persons/positions. A standard retrofit mounting kit includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously dealer or factory installed.

    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Buckle: Plastic push button measures 2 1/2" L x 2 3/8" W. Textured black top with chrome base.
  • Buckle Press Area: Recessed with 1 1/16" OD.
  • Buckle Press: Recessed 7/8" starburst framed in silver on black background.
  • Length 55": Adjustable buckle side 35". Fixed latch side 20".
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black.
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Belt Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.






    		•

    Deluxe Retrofit Non Retractable Lap Belt Set

    Set includes seat belts and deluxe retrofit mounting kit for 2 persons/positions. A deluxe retrofit mounting kit includes sleeved mounting mounting bolts, bolt head and end fitting covers and factory style curved steel underbody reinforcing plates with weldnut which should be used to add support to the mounting points when installing seat belts in a location they were not previously dealer or factory installed.
    Quantity:

    Quantity:
    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Buckle: Plastic push button measures 2 1/2" L x 2 3/8" W. Textured black top with chrome base.
  • Buckle Press Area: Recessed with 1 1/16" OD.
  • Buckle Press: Recessed 7/8" starburst framed in silver on black background.
  • Length 55": Adjustable buckle side 35". Fixed latch side 20".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Belt Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.

    • FAQ Contact Us:EMail Call Us:(302) 629-8508
    Components And Related Mounting Hardware And Kits Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW-VS16 6-17-24)