FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
More Buckle Choices Related Items On Sale Hardware And Mounting Kits



Aviator chrome lift lid release buckle with rectangular center cut-out latch non retractable lap seat belts available with 3 panel, 4 panel or 7 panel seat webbing in colors to match most original and aftermarket interior colors of most makes and models of American and imported automobiles and trucks. All seat belts are new universal fit and not implied to be vehicle or application specific manufactured or assembled in the USA with USA certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302. No guarantee is made as to fit or if a webbing color will match an existing seat belt or interior color.

For Lower Cost Vintage Chrome Lift Seat Belts.
For Aviator Buckle Seat Belts With Snap Hook End Fittings

(Click On To Enlarge) 7 Panel Seat Belt Webbing is a polypropylene blend and the most common used seat belt webbing since it offers the largest selection of webbing colors and has the lowest per yard cost becasue of the large quantity manufactured. All of the seat belt webbing utilized during the production process is 2"(1 15/16th) wide and manufacture certified to meet or to exceed all federal testing requirements. Webbing color, thickness or feel is not guaranteed to match existing seat belt or interior color.

(Click On To Enlarge) 3 Panel Seat Belt Webbing: is manufactured to feel and look like early production seat belt webbing used in most 1963-75 makes and models and is softer and more flexible than 7 panel webbing. It is produced in a limited number of colors and quantities making it more expensive than 7 panel seat belt webbing. All of the seat belt webbing utilized during the production process is 2"(1 15/16th) wide and manufacture certified to meet or to exceed all federal testing requirements. Webbing color, thickness or feel is not guaranteed to match an existing seat belt or interior color.

(Click On To Enlarge) 4 Panel Seat Belt Webbing: is manufactured to feel and look like seat belt webbing that was used in most 1963 and older makes and models. It is produced in the lowest number of colors and in limited quantities making it more expensive than 3 panel or 7 panel seat belt webbing. All of the seat belt webbing utilized during the production process is 2"(1 15/16th) wide and manufacture certified to meet or to exceed all federal testing requirements. Webbing color, thickness or feel is not guaranteed to match an existing seat belt or interior color.




Non Retractable Lap Belts With 7 Panel Webbing

Quantity:
Quantity:

Quantity:
Quantity:


Product Notes: Click On Picture To Enlarge.
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
    See Webbing Sample Page to view all available colors or to order samples.
  • Anchor End Fittings: Bright chrome flat with 1/2" mounting bolt holes.
  • Buckle: Aviator lift lid release with chrome lid and chrome underside. Measures 2 3/8" x 2 3/8".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • 80296 Retractor: Clip-on. Chrome 1950-60's style "Roll-A-Belt". Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting Kit: Includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.




  • Non Retractable Lap Belts With 3 Panel Webbing


    Quantity:
    Quantity:

    Quantity:
    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
    See Webbing Sample Page to view all available colors or to order samples.
  • Anchor End Fittings: Bright chrome flat with 1/2" mounting bolt holes.
  • Buckle: Aviator lift lid release with chrome lid and chrome underside. Measures 2 3/8" x 2 3/8".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • 80296 Retractor: Clip-on. Chrome 1950-60's style "Roll-A-Belt". Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting Kit: Includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers and threaded underbody reinforcing plates.




  • Non Retractable Lap Belts With 4 Panel Webbing

    Quantity:
    Quantity:

    Quantity:
    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
    See Webbing Sample Page to view all available colors or to order samples.
  • Anchor End Fittings: Bright chrome flat with 1/2" mounting bolt holes.
  • Buckle: Aviator lift lid release with chrome lid and chrome underside. Measures 2 3/8" x 2 3/8".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • 80296 Retractor: Clip-on. Chrome 1950-60's style "Roll-A-Belt". Includes installation instructions.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each. Black. Paint to match.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
    A retrofit mounting kit which includes reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH2 Standard Mounting Kit: Includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
    MH4 Standard Mounting Kit: Includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
    201K Retrofit Mounting Kit: Includes zinc chromate bolts, washers plus threaded underbody reinforcing plates.

  • Related Items


    Reinforcement Plates

    Quantity

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16-20 fine thread bolt.
  • RB4-2: Same as RB4 except pair.
  • For product questions or ordering assistance call (302)629-8508.


  • FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
    More Buckle Choices Related Items On Sale Hardware And Mounting Kits


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW6 10-20-19)