FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
More Buckle Choices Related Items On Sale Hardware And Mounting Kits




Vintage chrome lift lid release buckle non retractable lap seat belts with snap hooks that attach to eyebolts and 1 15/16th (2") 7 panel polypropylene blend seat webbing in colors to match most original and aftermarket interior colors used in most makes and models of American and imported automobiles and trucks. All of the seat belts are new universal fit and not implied to be vehicle or application specific and manufactured or assembled in the USA with USA certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302. No guarantee is made as to fit or if a webbing color will match an existing seat belt or interior color.

For Vintage Chrome Lid Seat Belts With Fixed End Fittings






Non Retractable Lap Belt With 1 1/2" Snap Hooks

Quantity:


Quantity:
Quantity:


Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: Snap hooks.1 1/2" W x 2 5/8" L. Opens 3/8".
  • Buckle: Lift lid release with chrome lid and chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • CR1 Retractor: Clip-on. Black plastic. Measures 3" x 2 1/2". Includes installation instructions
  • 80296 Retractor: Clip-on. Chrome 1950-60's style "Roll-A-Belt". Includes installation instructions.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH3 Standard Mounting Kit: Includes yellow zinc eyebolts, washers, nuts and oversize underbody reinforcing washers.
    205K Retrofit Mounting Kit: Includes yellow zinc eyebolts and threaded underbody reinforcing plates.




  • Non Retractable Lap Belt With 2" Snap Hooks

    Quantity:


    Quantity:
    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Special Order. Not Returnable. Allow additional 5-7 business days for production.
    See Webbing Sample Page to view all available colors or to order samples.
  • Anchor End Fittings: Snap hooks. 2 7/8" W x 2 3/4" L. Opens 1/2".
  • Buckle: Lift lid release with dull satin lid and chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • CR1 Retractor: Clip-on. Black plastic. Measures 3" x 2 1/2". Includes installation instructions
  • 80296 Retractor: Clip-on. Chrome 1950-60's style "Roll-A-Belt". Includes installation instructions.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
    A retrofit mounting kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    MH3 Standard Mounting Kit: Includes yellow zinc eyebolts, washers, nuts and oversize underbody reinforcing washers.
    205K Retrofit Mounting Kit: Includes yellow zinc eyebolts and threaded underbody reinforcing plates.

  • Related Items


    Reinforcement Plates

    Quantity

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16-20 fine thread bolt.
  • RB4-2: Same as RB4 except pair.
  • For product questions or ordering assistance call (302)629-8508.


  • FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
    More Buckle Choices Related Items On Sale Hardware And Mounting Kits


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW5-1 10-19-19)