FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
Related Items On Sale Mounting Hardware And Kits

For 1967-80 Retrofit Conversion Kits.


Retractable combination lap seat belts with shoulder harness retrofit conversion kits that include the required mounting hardware along with installation instructions to add a retractable lap seat belt with shoulder harness into most makes and models of 1947-66 cars and trucks that did not previously have a retractabe lap seat belt with shoulder harness installed or to be used to upgrade from a non retractable or retractable lap seat belt only to a combination retractable lap seat belt with shoulder harness. Available for bench seat and bucket seats. All of the seat belts and hardware listed are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.





With Vintage Lift Lid Buckle

Important Installation Note; To install a reinforced shoulder harness mounting point must exist or be created above the shoulder and behind a steel panel that is not the exterior panel in order to position a supplied threaded reinforcement plate between the inner and outer steel panel sucured with supplied rivets that is required to attached the shoulder harness webbing feed thru upper bracket.

Quantity:

Quantity:

Quantity:
Quantity:

Product Notes: Click On Picture To Enlarge
Special Order. Allow an additional 5-7 business days for production.
  • Includes: Seat belts and installation hardware for the driver and passenger with installation instructions.
  • Available with black webbing only.
  • Buckle: Lift lid release with chrome lid and underside. Measures 2 1/8" x 2 1/2".
  • Center/Rear Seat Belt Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Center/Rear Seat Belt Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing in a location were they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.





  • With Sunburst Logo Buckle

    Important Installation Note; To install a reinforced shoulder harness mounting point must exist or be created above the shoulder and behind a steel panel that is not the exterior panel in order to position a supplied threaded reinforcement plate between the inner and outer steel panel sucured with supplied rivets that is required to attached the shoulder harness webbing feed thru upper bracket.

    Quantity:

    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Includes: Seat belts and installation hardware for the driver and passenger with installation instructions.
  • Available with black webbing only.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8" with Sunburst design on the press area.
  • Center/Rear Seat Belt Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Center/Rear Seat Belt Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing in a location were they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.




  • With GM Logo Buckle

    Important Installation Note; To install a reinforced shoulder harness mounting point must exist or be created above the shoulder and behind a steel panel that is not the exterior panel in order to position a supplied threaded reinforcement plate between the inner and outer steel panel sucured with supplied rivets that is required to attached the shoulder harness webbing feed thru upper bracket.

    Quantity:

    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Includes: Seat belts and installation hardware for the driver and passenger with installation instructions.
  • >Available with black webbing only.
  • Buckle: Metal. Measures 1 7/8" x 1 7/8" with GM Mark Of Excellence on the press area.
  • Manufactured under GM reproduction license.
  • Center/Rear Seat Belt Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Center/Rear Seat Belt Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Hardware
  • MH4 Standard Mounting kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing in a location were they were not previously dealer or factory installed. A standard mounting kit is not required when ordering.


  • FAQ Main Index Page Contact Us:EMail Call Us:(302) 629-8508
    Related Items On Sale Mounting Hardware And Kits


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR25 3-5-20)