On sale Return To Seat Belt Main Index Page Build Your Own Contact Us:EMail Call Us:(302) 629-8508
Matching Non Retractable With Shoulder Harness Belts Matching Retractable Lap Belts Matching Retractable Belts With Harness Individual Components,Hardware And Webbing Build Your Own

Push button buckle non retractable lap seat belts with a white "PRESS" on red press area background available with webbing colors to match most interiors of most makes and models of American and imported automobiles and trucks that are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

The seat belts are not implied to be vehicle or application specific. No guarantee is made as to fit or if a component or webbing color will match an existing seat belt or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.






Quantity
**After the color indicates that the buckle and plastic pieces are color matched to the webbing color.

Click Here To view webbing colors or to order webbing samples

Add MH2 Mounting Kit. Per Seat Belt $3.75ea
Add 201K Retrofit Mounting Kit. Per Seat Belt $12.00ea
Add CR1 Plastic Clip On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A-Belt" Clip On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Unless** indicated next to color the buckle plus all plastic pieces are black.
  • Length 60": Adjustable side 36". Buckle side 24".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Length 90": Adjustable side 45". Buckle side 45".
  • Lengths listed are approximate.
  • MH2 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH2 mounting kit not required when ordering a retrofit kit.
  • Click Here For Matching Non Retractable With Shoulder Harness Seat Belts.
  • Click Here For Matching Retractable Seat Belts.
    For product questions or ordering assistance call (302)629-8508

  • Lap Seat Belt With Sleeved Buckle Side

    Quantity
    **After the color indicates the buckle and plastic pieces are color matched to the webbing color.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH2 Mounting Kit. Per Seat Belt $3.75ea
    Add 201K Retrofit Mounting Kit. Per Seat Belt $12.00ea


    Product Notes: Click On Picture To Enlarge
  • Unless** indicated next to color the buckle plus all plastic pieces are black.
  • Length 60": Adjustable side 48". Buckle side 12" long with sleeve.
  • Length 74": Adjustable side 62". Buckle side 12" long with sleeve.
  • Lengths listed are approximate.
  • MH2 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH2 mounting kit not required when ordering a retrofit kit.
  • Click Here For Matching Non Retractable With Shoulder Harness Seat Belts.
  • Click Here For Matching Retractable Seat Belts.
    For product questions or ordering assistance call (302)629-8508


  • Specialty Mounting Brackets

    Quantity:

    Add MH2 Mounting Kit. Per Bracket $3.75ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long single angle bracket. Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508
  • Reinforcement Plates

    Quantity:
    Add MH11 Seat belt Mounting Bolt Per Plate $1.30ea
    Add MH12 Lock Washer Per Plate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2".
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508

  • Retractors, Clip On Webbing

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 black plastic retractor measures 3" x 2 1/2".
  • 80296 chrome "Roll-A-Belt". Barrell measures 2 1/2".
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508

  • On sale Return To Seat Belt Main Index Page Build Your Own Contact Us:EMail Call Us:(302) 629-8508
    Matching Non Retractable With Shoulder Harness Seat Belts Matching Retractable Seat Belts Individual Components,Hardware And Webbing Build Your Own


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR9 1-28-17)