Return To Main Seat Belt Index Page On Sale Contact Us:EMail Call Us:(302)629-8508
Individual Components,Hardware And Webbing Matching Non Retractable Seat Belts


Push button seat belts available as a retractable lap seat belt and a retractable lap seat belt with shoulder harness. All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302.

The seat belts listed are an universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a component or webbing color will match an existing seat belt or interior color.

Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

Retractable Lap Seat Belts




For A Bench Seat

Quantity

Add 200K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $4.25ea
Add MH5 L-Bracket With Hardware Kit For (200K)Buckle Side $2.75ea
Add 204K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $13.75ea
Add 202K Retrofit Mounting Kit. Includes L-Bracket With Hardware For Buckle Side $16.25ea

Product Notes: Click On Picture To Enlarge
  • The webbing when fully extended from retractor measures 52" Long.
  • The buckle side measures 18" from the center of mounting bolt hole to end of buckle.
  • Can be used for a drivers or passenger side installation.
  • The retractor is automatic locking(ALR).
  • When the webbing has been pulled and released at the required length the retractor will lock.
  • To adjust the length one the retractor has locked release the webbing back to the retractor and re-pull.
  • Lengths are approximate.

    Mounting Hardware Selection
  • 200K standard mounting kit includes bolts, washers, nuts, reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit mounting kit should be used when installing a seat belt at a location where a seat belt was not previously factory or dealer installed.
  • Retrofit mounting kits include underbody reinforcement plates to add support to the mounting points.
  • When a retrofit mounting kit is used a 200K standard mounting kit is not required.

  • Click Here For Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508





  • For A Bucket Seat

    Quantity

    Add 200K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $4.25ea
    Add MH5 L-Bracket With Hardware Kit For (200K)Buckle Side $2.75ea
    Add 204K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $13.75ea
    Add 202K Retrofit Mounting Kit. Includes L-Bracket With Hardware For Buckle Side $16.25ea

    Product Notes: Click On Picture To Enlarge
  • Allow 14-21 days manufacturing lead time when ordering with orange webbing. Sold Not Returnable.
  • The webbing when fully extended from retractor measures 52" Long.
  • The buckle side measures 12" long and is covered with a contoured plastic sleeve.
  • Can be used for a drivers or passenger side installation.
  • The retractor is automatic locking(ALR).
  • When the webbing has been pulled and released at the required length the retractor will lock.
  • To adjust the length one the retractor has locked release the webbing back to the retractor and re-pull.
  • Lengths are approximate.

    Mounting Hardware Selection
  • 200K standard mounting kit includes bolts, washers, nuts, reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit mounting kit should be used when installing a seat belt at a location where a seat belt was not previously factory or dealer installed.
  • Retrofit mounting kits includes underbody reinforcement plates to add support to the mounting points.
  • When a retrofit mounting kit is used a 200K standard mounting kit is not required.

  • Click Here For Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508

  • Retractable Lap With Shoulder Harness Seat Belts








    For A Bench Seat

    Quantity

    Add 300K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $5.25ea
    Add MH5 L-Bracket With Hardware Kit For (300K)Buckle Side $2.75ea
    Add 303K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $22.50ea
    Add 302K Retrofit Mounting Kit. Includes L-Bracket With Hardware For Buckle Side $25.75ea

    Add ADJ3B Black Latch Stop Button $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea


    Product Notes: Click On Picture To Enlarge
  • Can be used for a drivers or passenger side installation.
  • The webbing fully extended from retractor measures 141" long.
  • The buckle side measures 18" from the center of the mounting bolt hole to the end of buckle.
  • A latch stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • The retractor is web sensitive emergency locking(ELR) that allows movement and locks on sudden webbing movement.
  • Lengths are approximate.

    (DPE)Door Post Extension Length Selection
  • Most installations use a standard 2" DPE which lowers the webbing approximately 1 3/8" from the mounting point.
  • A 8" DPE lowers the webbing approximately 7 1/2" from the mounting point.

    Mounting Hardware Selection
  • 300K standard mounting kit includes bolts, washers, nuts, reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit mounting kit should be used when installing a seat belt at a location where a seat belt was not previously factory or dealer installed.
  • Retrofit mounting kits include underbody reinforcement plates to add support to the mounting points.
  • When a retrofit mounting kit is used a 300K standard mounting kit is not required.

  • Click Here For Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508







  • For A Bucket Seat

    Quantity

    Add 300K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $5.25ea
    Add MH5 L-Bracket With Hardware Kit For (300K)Buckle Side $2.75ea
    Add 303K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $22.50ea
    Add 302K Retrofit Mounting Kit. Includes L-Bracket With Hardware For Buckle Side $25.75ea

    Add ADJ3B Black Latch Stop Button $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes: Click On Picture To Enlarge
  • Can be used for a drivers or passenger side installation.
  • The webbing fully extended from retractor measures 141" long.
  • The buckle side measures approximately 12" long and is covered with a contoured plastic sleeve.
  • A latch stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • The retractor is web sensitive emergency locking(ELR) that allows movement and locks on sudden webbing movement.
  • Lengths are approximate.

    (DPE)Door Post Extension Length Selection
  • Most installations use a standard 2" DPE which lowers the webbing approximately 1 3/8" from the mounting point.
  • A 8" DPE lowers the webbing approximately 7 1/2" from the mounting point.

    Mounting Hardware Selection
  • 300K standard mounting kit includes bolts, washers, nuts, reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit mounting kit should be used when installing a seat belt at a location where a seat belt was not previously factory or dealer installed.
  • Retrofit mounting kits include underbody reinforcement plates to add support to the mounting points.
  • When a retrofit mounting kit is used a 300K standard mounting kit is not required.

  • Click Here For Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508


  • Related Hardware


    Specialty Mounting Brackets

    Quantity:
    Add MH2 Mounting Kit. Per Bracket. $3.25ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket.
  • RB7: 3" long flat extension. .
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB9: 5" long double angle bracket. Special order. Allow 14-21 days.
  • RB10: 12" long single angle bracket. Special order. Allow 14-21 days.
  • RB11: 6" long flat extension. .
  • Lengths are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Reinforcement Plates

    Quantity:
    Add MH11 Mounting Bolt Per Plate. Zinc chromate $1.30ea
    Add MH12 Lock Washer per Plate. Zinc chromate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Return To Main Seat Belt Index Page On Sale Contact Us:EMail Call Us:(302)629-8508
    Individual Components,Hardware And Webbing Matching Non Retractable Seat Belts

    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR8-1 1-31-17)