On Sale More Non Retractable Options More Retractable Options Seat Belt Index Page
Individual Components,Hardware And Webbing Build Your Own Contact Us:EMail Call Us:(302) 629-8508


General Motors GM Mark Of Excellence logo seat belts available as a non retractable lap seat belt, retractable lap seat belt and non retractable independent shoulder harness in the original factory configurations with 3 panel original appearance or a modern style 7 panel seat belt webbing. Complete car sets are also listed that include front retractable lap seat belts with independent shoulder harness and retractable front lap seat belts with independent shoulder harness plus matching rear non retractable lap seat belts. No guarantee is made if the seat belt webbing color or a component color will match an existing seat belt or interior color.

All seat belts and hardware are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

With 7 Panel Webbing






Non Retractable Lap Seat Belts

Quantity

Click Here To View Available Webbing Colors Or To Order Webbing Samples
**After webbing color indicates buckle is color matched to webbing.

Add MH4 Standard Mounting Kit. $5.25ea
Add 201K Retrofit Mounting Kit. $12.00ea
Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Can be ordered with any webbing color on sample page. Contact us for availability.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area.
  • Length 60": Adjustable side 36". Buckle side 24".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Floor anchor end fittings are chrome flat with a 1/2" mounting bolt hole.
  • The buckle is black unless indicated as color matched to the webbing.
  • Lengths are approximate.
  • Standard mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 standard mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.

  • With 3 Panel Webbing





    Non Retractable Lap Seat Belts

    Quantity

    Click Here To View Available Webbing Colors Or To Order Webbing Samples
    **After the webbing color indicates buckle is color matched to webbing.

    Add MH4 Standard Mounting Kit. $5.25ea
    Add 201K Retrofit Mounting Kit $12.00ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Can be ordered with any webbing color on sample page. Contact us for availability.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area.
  • Length 60": Adjustable side 36". Buckle side 24".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Floor anchor end fittings are chrome flat with a 1/2" mounting bolt hole.
  • The buckle is black unless indicated as color matched to the webbing.
  • Lengths are approximate.
  • Standard mounting kit includes bolts, washers,nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 standard mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.



  • Front Retractable Lap Seat Belt Set

    Quantity

    Click Here To View Available Webbing Colors Or Order Webbing Samples
    **After webbing color indicates buckle and retractor covers are color matched to the webbing.

    Product Notes: Click On Picture To Enlarge
  • Sold As Set,
  • Includes front retractable lap seat belts with covers for driver and passenger.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area
  • Can be ordered with any webbing color on sample page. Contact us for availability.
  • The buckle and retractor covers are black unless indicated as color matched to the webbing.
  • See non retractable lap seat belts with 3 panel webbing to add matching front center or rear seat belt.
  • Contact us for availability of a driver or passengers side only.
    For product questions or ordering assistance call (302)629-8508.




  • Front Non Retractable Front Shoulder Harness Set

    Quantity

    Click Here To View Available Webbing Colors Or To Order Webbing Samples
    **After webbing color indicates buckle is color matched to the webbing.

    Product Notes: Click On Picture To Enlarge
  • Sold As A Set.
  • Includes independent shoulder harness with buckle for driver and passenger.
  • Shoulder harness anchor bracket,cover included, bolts to the factory two hole lower roof mounting points.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area.
  • The buckle is black unless indicated as color matched to the webbing.
  • Can be ordered with any webbing color on sample page. Contact us for availability.
    For product questions or ordering assistance call (302)629-8508.
  • Car Sets, Front And Rear




    Front Retractable Plus Rear Non Retractable

    Quantity

    Click Here To View Available Webbing Colors Or To Order Webbing Samples
    **After webbing color indicates buckle and retractor covers are color matched to the webbing.

    Product Notes: Click On Picture To Enlarge
  • Sold As Set.
  • Includes front retractable lap seat belts for driver and passenger plus 3 matching 60" non retractable rear lap belts.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area.
  • The buckles and retractor covers are black unless indicated as color matched to the webbing.
  • Can be ordered with any webbing color on sample page. Contact us for availability.
    For product questions or ordering assistance call (302)629-8508.



  • Front Retractable Front, Front Shoulder Harness, 3 Rear Non retractable

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples
    **Prior to webbing color indicates buckle is color matched to the webbing.

    Product Notes: Click On Picture To Enlarge
  • Sold As Set.
  • Includes front retractable lap seat belts, 2 independent shoulder harness fron driver and passenger plus 3 matching 60" non retractable rear lap belts.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area.
  • The buckles and retractor covers are black unless indicated as color matched to the webbing.
  • Shoulder harness anchor bracket,cover included, bolts to the factory two hole lower roof mounting points.
  • Can be ordered with any webbing color on sample page. Contact us for availability.
    For product questions or ordering assistance call (302)629-8508.


  • Reinforcing Plates


    Quantity:

    Add MH11 Mounting Bolt Per Plate $1.30ea
    Add MH12 Lock Washer per Plate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1:Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3:Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4:Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Measurements are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • On Sale More Non Retractable Options More Retractable Options Seat Belt Index Page
    Individual Components And Hardware Build Your Own Contact Us:EMail Call Us:(302) 629-8508

    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR3 3-15-17)